Table of Contents
This chapter should help you to deploy Winbind-based authentication on any PAM-enabled UNIX/Linux system. Winbind can be used to enable user-level application access authentication from any MS Windows NT domain, MS Windows 200x Active Directory-based domain, or any Samba-based domain environment. It will also help you to configure PAM-based local host access controls that are appropriate to your Samba configuration.
The use of Winbind requires more than PAM configuration alone. Please refer to Winbind: Use of Domain Accounts, for further information regarding Winbind.
A number of UNIX systems (e.g., Sun Solaris), as well as the xxxxBSD family and Linux,
now utilize the Pluggable Authentication Modules (PAM) facility to provide all authentication,
authorization, and resource control services. Prior to the introduction of PAM, a decision
to use an alternative to the system password database (
would require the provision of alternatives for all programs that provide security services.
Such a choice would involve provision of alternatives to programs such as
chown, and so on.
PAM provides a mechanism that disconnects these security programs from the underlying
authentication/authorization infrastructure. PAM is configured by making appropriate modifications to one file,
/etc/pam.conf (Solaris), or by editing individual control files that are
On PAM-enabled UNIX/Linux systems, it is an easy matter to configure the system to use any authentication backend so long as the appropriate dynamically loadable library modules are available for it. The backend may be local to the system or may be centralized on a remote server.
PAM support modules are available for:
pam_ldap.so module allows the use of any LDAP v2- or v3-compatible backend
server. Commonly used LDAP backend servers include OpenLDAP v2.0 and v2.1,
Sun ONE iDentity server, Novell eDirectory server, and Microsoft Active Directory.
There is a PAM RADIUS (Remote Access Dial-In User Service) authentication module. In most cases, administrators need to locate the source code for this tool and compile and install it themselves. RADIUS protocols are used by many routers and terminal servers.
Once configured, these permit a remarkable level of flexibility in the location and use of distributed Samba domain controllers that can provide wide-area network bandwidth, efficient authentication services for PAM-capable systems. In effect, this allows the deployment of centrally managed and maintained distributed authentication from a single-user account database.
PAM is designed to provide system administrators with a great deal of flexibility in
configuration of the privilege-granting applications of their system. The local
configuration of system security controlled by PAM is contained in one of two places:
either the single system file
/etc/pam.conf or the
In this section we discuss the correct syntax of and generic options respected by entries to these files. PAM-specific tokens in the configuration file are case insensitive. The module paths, however, are case sensitive, since they indicate a file's name and reflect the case dependence of typical file systems. The case sensitivity of the arguments to any given module is defined for each module in turn.
In addition to the lines described below, there are two special characters provided for the convenience of the system administrator: comments are preceded by a “#” and extend to the next end-of-line; also, module specification lines may be extended with a “\”-escaped newline.
If the PAM authentication module (loadable link library file) is located in the
default location, then it is not necessary to specify the path. In the case of
Linux, the default location is
/lib/security. If the module
is located outside the default, then the path must be specified as:
auth required /other_path/pam_strange_module.so
The remaining information in this subsection was taken from the documentation of the Linux-PAM project. For more information on PAM, see the Official Linux-PAM home page.
service-name module-type control-flag module-path args
We explain the meaning of each of these tokens. The second (and more recently adopted)
way of configuring Linux-PAM is via the contents of the
Once we have explained the meaning of the tokens, we describe this method.
There is a special service-name reserved for defining a default authentication mechanism. It has
OTHER and may be specified in either lower- or uppercase characters.
Note, when there is a module specified for a named service, the
entries are ignored.
One of (currently) four types of module. The four types are as follows:
auth: This module type provides two aspects of authenticating the user.
It establishes that the user is who he or she claims to be by instructing the application
to prompt the user for a password or other means of identification. Second, the module can
grant group membership (independently of the
or other privileges through its credential-granting properties.
account: This module performs non-authentication-based account management.
It is typically used to restrict/permit access to a service based on the time of day, currently
available system resources (maximum number of users), or perhaps the location of the user
login. For example, the “root” login may be permitted only on the console.
session: Primarily, this module is associated with doing things that need
to be done for the user before and after he or she can be given service. Such things include logging
information concerning the opening and closing of some data exchange with a user, mounting
directories, and so on.
password: This last module type is required for updating the authentication
token associated with the user. Typically, there is one module for each
(auth) module type.
The control-flag is used to indicate how the PAM library will react to the success or failure of the
module it is associated with. Since modules can be stacked (modules of the same type execute in series,
one after another), the control-flags determine the relative importance of each module. The application
is not made aware of the individual success or failure of modules listed in the
/etc/pam.conf file. Instead, it receives a summary success or fail response from
the Linux-PAM library. The order of execution of these modules is that of the entries in the
/etc/pam.conf file; earlier entries are executed before later ones.
As of Linux-PAM v0.60, this control-flag can be defined with one of two syntaxes.
The simpler (and historical) syntax for the control-flag is a single keyword defined to indicate the
severity of concern associated with the success or failure of a specific module. There are four such
The Linux-PAM library interprets these keywords in the following manner:
required: This indicates that the success of the module is required for the
module-type facility to succeed. Failure of this module will not be apparent to the user until all
of the remaining modules (of the same module-type) have been executed.
requisite: Like required, except that if such a module returns a
failure, control is directly returned to the application. The return value is that associated with
the first required or requisite module to fail. This flag can be used to protect against the
possibility of a user getting the opportunity to enter a password over an unsafe medium. It is
conceivable that such behavior might inform an attacker of valid accounts on a system. This
possibility should be weighed against the not insignificant concerns of exposing a sensitive
password in a hostile environment.
sufficient: The success of this module is deemed
sufficient to satisfy
the Linux-PAM library that this module-type has succeeded in its purpose. In the event that no
previous required module has failed, no more “stacked” modules of this type are invoked.
(In this case, subsequent required modules are not invoked). A failure of this module is not deemed
as fatal to satisfying the application that this module-type has succeeded.
optional: As its name suggests, this control-flag marks the module as not
being critical to the success or failure of the user's application for service. In general,
Linux-PAM ignores such a module when determining if the module stack will succeed or fail.
However, in the absence of any definite successes or failures of previous or subsequent stacked
modules, this module will determine the nature of the response to the application. One example of
this latter case is when the other modules return something like PAM_IGNORE.
The more elaborate (newer) syntax is much more specific and gives the administrator a great deal of control
over how the user is authenticated. This form of the control-flag is delimited with square brackets and
consists of a series of
[value1=action1 value2=action2 ...]
value1 is one of the following return values:
success; open_err; symbol_err; service_err; system_err; buf_err;
perm_denied; auth_err; cred_insufficient; authinfo_unavail;
user_unknown; maxtries; new_authtok_reqd; acct_expired; session_err;
cred_unavail; cred_expired; cred_err; no_module_data; conv_err;
authtok_err; authtok_recover_err; authtok_lock_busy;
authtok_disable_aging; try_again; ignore; abort; authtok_expired;
The last of these (
default) can be used to set the action for those return values that are not explicitly defined.
action1 can be a positive integer or one of the following tokens:
A positive integer, J, when specified as the action, can be used to indicate that the next J modules of the
current module-type will be skipped. In this way, the administrator can develop a moderately sophisticated
stack of modules with a number of different paths of execution. Which path is taken can be determined by the
reactions of individual modules.
ignore: When used with a stack of modules, the module's return status will not
contribute to the return code the application obtains.
bad: This action indicates that the return code should be thought of as indicative
of the module failing. If this module is the first in the stack to fail, its status value will be used
for that of the whole stack.
die: Equivalent to bad with the side effect of terminating the module stack and
PAM immediately returning to the application.
ok: This tells PAM that the administrator thinks this return code should
contribute directly to the return code of the full stack of modules. In other words, if the former
state of the stack would lead to a return of PAM_SUCCESS, the module's return code will override
this value. Note, if the former state of the stack holds some value that is indicative of a module's
ok value will not be used to override that value.
done: Equivalent to
ok with the side effect of terminating the module stack and
PAM immediately returning to the application.
reset: Clears all memory of the state of the module stack and starts again with
the next stacked module.
Each of the four keywords,
optional, have an equivalent expression in terms
of the [...] syntax. They are as follows:
required is equivalent to
[success=ok new_authtok_reqd=ok ignore=ignore default=bad].
requisite is equivalent to
[success=ok new_authtok_reqd=ok ignore=ignore default=die].
sufficient is equivalent to
[success=done new_authtok_reqd=done default=ignore].
optional is equivalent to
[success=ok new_authtok_reqd=ok default=ignore].
Just to get a feel for the power of this new syntax, here is a taste of what you can do with it. With Linux-PAM-0.63,
the notion of client plug-in agents was introduced. This makes it possible for PAM to support
machine-machine authentication using the transport protocol inherent to the client/server application. With the
[ ... value=action ... ] control syntax, it is possible for an application to be configured
to support binary prompts with compliant clients, but to gracefully fail over into an alternative authentication
mode for legacy applications.
The pathname of the dynamically loadable object file; the pluggable module itself. If the first character of the
module path is “/”, it is assumed to be a complete path. If this is not the case, the given module path is appended
to the default module path:
/lib/security (but see the previous notes).
The arguments are a list of tokens that are passed to the module when it is invoked, much like arguments to a typical Linux shell command. Generally, valid arguments are optional and are specific to any given module. Invalid arguments are ignored by a module; however, when encountering an invalid argument, the module is required to write an error to syslog(3). For a list of generic options, see the next section.
If you wish to include spaces in an argument, you should surround that argument with square brackets. For example:
squid auth required pam_mysql.so user=passwd_query passwd=mada \ db=eminence [query=select user_name from internet_service where \ user_name=“%u” and password=PASSWORD(“%p”) and service=“web_proxy”]
When using this convention, you can include “[” characters inside the string, and if you wish to have a “]” character inside the string that will survive the argument parsing, you should use “\[”. In other words,
[..[..\]..] --> ..[..]..
Any line in one of the configuration files that is not formatted correctly will generally tend (erring on the side of caution) to make the authentication process fail. A corresponding error is written to the system log files with a call to syslog(3).
The following is an example
/etc/pam.d/login configuration file.
This example had all options uncommented and is probably not usable
because it stacks many conditions before allowing successful completion
of the login process. Essentially, all conditions can be disabled
by commenting them out, except the calls to
#%PAM-1.0 # The PAM configuration file for the “login” service # auth required pam_securetty.so auth required pam_nologin.so # auth required pam_dialup.so # auth optional pam_mail.so auth required pam_pwdb.so shadow md5 # account requisite pam_time.so account required pam_pwdb.so session required pam_pwdb.so # session optional pam_lastlog.so # password required pam_cracklib.so retry=3 password required pam_pwdb.so shadow md5
PAM allows use of replaceable modules. Those available on a sample system include:
pam_access.so pam_ftp.so pam_limits.so pam_ncp_auth.so pam_rhosts_auth.so pam_stress.so pam_cracklib.so pam_group.so pam_listfile.so pam_nologin.so pam_rootok.so pam_tally.so pam_deny.so pam_issue.so pam_mail.so pam_permit.so pam_securetty.so pam_time.so pam_dialup.so pam_lastlog.so pam_mkhomedir.so pam_pwdb.so pam_shells.so pam_unix.so pam_env.so pam_ldap.so pam_motd.so pam_radius.so pam_smbpass.so pam_unix_acct.so pam_wheel.so pam_unix_auth.so pam_unix_passwd.so pam_userdb.so pam_warn.so pam_unix_session.so
The following example for the login program replaces the use of
pam_pwdb.so module that uses the system
password database (
pam_smbpass.so, which uses the Samba
database containing the Microsoft MD4 encrypted password
hashes. This database is stored either in
/etc/samba/smbpasswd or in
/etc/samba.d/smbpasswd, depending on the
Samba implementation for your UNIX/Linux system. The
pam_smbpass.so module is provided by
Samba version 2.2.1 or later. It can be compiled by specifying the
--with-pam_smbpass options when running Samba's
configure script. For more information
pam_smbpass module, see the documentation
source/pam_smbpass directory of the Samba
#%PAM-1.0 # The PAM configuration file for the “login” service # auth required pam_smbpass.so nodelay account required pam_smbpass.so nodelay session required pam_smbpass.so nodelay password required pam_smbpass.so nodelay
The following is the PAM configuration file for a particular
Linux system. The default condition uses
#%PAM-1.0 # The PAM configuration file for the “samba” service # auth required pam_pwdb.so nullok nodelay shadow audit account required pam_pwdb.so audit nodelay session required pam_pwdb.so nodelay password required pam_pwdb.so shadow md5
In the following example, the decision has been made to use the
smbpasswd database even for basic Samba authentication. Such a
decision could also be made for the
passwd program and would
thus allow the
smbpasswd passwords to be changed using the
#%PAM-1.0 # The PAM configuration file for the “samba” service # auth required pam_smbpass.so nodelay account required pam_pwdb.so audit nodelay session required pam_pwdb.so nodelay password required pam_smbpass.so nodelay smbconf=/etc/samba.d/smb.conf
PAM allows stacking of authentication mechanisms. It is
also possible to pass information obtained within one PAM module through
to the next module in the PAM stack. Please refer to the documentation for
your particular system implementation for details regarding the specific
capabilities of PAM in this environment. Some Linux implementations also
pam_stack.so module that allows all
authentication to be configured in a single central file. The
pam_stack.so method has some devoted followers
on the basis that it allows for easier administration. As with all issues in
life, though, every decision has trade-offs, so you may want to examine the
PAM documentation for further helpful information.
There is an option in
smb.conf called obey pam restrictions.
The following is from the online help for this option in SWAT:
When Samba is configured to enable PAM support (i.e.,
--with-pam), this parameter will control whether or not Samba should obey PAM's account and session management directives. The default behavior is to use PAM for clear-text authentication only and to ignore any account or session management. Samba always ignores PAM for authentication in the case of encrypt passwords = yes. The reason is that PAM modules cannot support the challenge/response authentication mechanism needed in the presence of SMB password encryption.
Default: obey pam restrictions = no
All operating systems depend on the provision of user credentials acceptable to the platform.
UNIX requires the provision of a user identifier (UID) as well as a group identifier (GID).
These are both simple integer numbers that are obtained from a password backend such
Users and groups on a Windows NT server are assigned a relative ID (RID) which is unique for the domain when the user or group is created. To convert the Windows NT user or group into a UNIX user or group, a mapping between RIDs and UNIX user and group IDs is required. This is one of the jobs that winbind performs.
As winbind users and groups are resolved from a server, user and group IDs are allocated from a specified range. This is done on a first come, first served basis, although all existing users and groups will be mapped as soon as a client performs a user or group enumeration command. The allocated UNIX IDs are stored in a database file under the Samba lock directory and will be remembered.
The astute administrator will realize from this that the combination of
winbindd, and a distributed passdb backend
ldap will allow the establishment of a centrally managed, distributed user/password
database that can also be used by all PAM-aware (e.g., Linux) programs and applications. This arrangement can have
particularly potent advantages compared with the use of Microsoft Active Directory Service (ADS) insofar as
the reduction of wide-area network authentication traffic.
The RID to UNIX ID database is the only location where the user and group mappings are
winbindd. If this file is deleted or corrupted, there is no way for
to determine which user and group IDs correspond to Windows NT user and group RIDs.
pam_smbpass is a PAM module that can be used on conforming systems to
smbpasswd (Samba password) database in sync with the UNIX
password file. PAM is an API supported
under some UNIX operating systems, such as Solaris, HPUX, and Linux, that provides a
generic interface to authentication mechanisms.
This module authenticates a local
smbpasswd user database. If you require
support for authenticating against a remote SMB server, or if you are
concerned about the presence of SUID root binaries on your system, it is
recommended that you use
Options recognized by this module are shown in next table.
Table 28.1. Options recognized by
|debug||Log more debugging info.|
|audit||Like debug, but also logs unknown usernames.|
|use_first_pass||Do not prompt the user for passwords; take them from PAM_ items instead.|
|try_first_pass||Try to get the password from a previous PAM module; fall back to prompting the user.|
|use_authtok||Like try_first_pass, but *fail* if the new PAM_AUTHTOK has not been previously set (intended for stacking password modules only).|
|not_set_pass||Do not make passwords used by this module available to other modules.|
|nodelay||dDo not insert ~1-second delays on authentication failure.|
|nullok||Null passwords are allowed.|
|nonull||Null passwords are not allowed. Used to override the Samba configuration.|
|migrate||Only meaningful in an “auth” context; used to update smbpasswd file with a password used for successful authentication.|
|smbconf=||Specify an alternate path to the |
The following are examples of the use of
pam_smbpass.so in the format of the Linux
/etc/pam.d/ files structure. Those wishing to implement this
tool on other platforms will need to adapt this appropriately.
The following is a sample PAM configuration that shows the use of pam_smbpass to make
private/smbpasswd is kept in sync when
is changed. It is useful when an expired password might be changed by an
application (such as
#%PAM-1.0 # password-sync # auth requisite pam_nologin.so auth required pam_unix.so account required pam_unix.so password requisite pam_cracklib.so retry=3 password requisite pam_unix.so shadow md5 use_authtok try_first_pass password required pam_smbpass.so nullok use_authtok try_first_pass session required pam_unix.so
The following PAM configuration shows the use of
pam_smbpass to migrate
from plaintext to encrypted passwords for Samba. Unlike other methods,
this can be used for users who have never connected to Samba shares:
password migration takes place when users
ftp in, login using
their mail, and so on.
#%PAM-1.0 # password-migration # auth requisite pam_nologin.so # pam_smbpass is called IF pam_unix succeeds. auth requisite pam_unix.so auth optional pam_smbpass.so migrate account required pam_unix.so password requisite pam_cracklib.so retry=3 password requisite pam_unix.so shadow md5 use_authtok try_first_pass password optional pam_smbpass.so nullok use_authtok try_first_pass session required pam_unix.so
The following is a sample PAM configuration for a mature
private/smbpasswd is fully populated, and we consider it an error if
the SMB password does not exist or does not match the UNIX password.
#%PAM-1.0 # password-mature # auth requisite pam_nologin.so auth required pam_unix.so account required pam_unix.so password requisite pam_cracklib.so retry=3 password requisite pam_unix.so shadow md5 use_authtok try_first_pass password required pam_smbpass.so use_authtok use_first_pass session required pam_unix.so
The following is a sample PAM configuration that shows
pam_smbpass used together with
pam_krb5. This could be useful on a Samba PDC that is also a member of
a Kerberos realm.
#%PAM-1.0 # kdc-pdc # auth requisite pam_nologin.so auth requisite pam_krb5.so auth optional pam_smbpass.so migrate account required pam_krb5.so password requisite pam_cracklib.so retry=3 password optional pam_smbpass.so nullok use_authtok try_first_pass password required pam_krb5.so use_authtok try_first_pass session required pam_krb5.so
PAM can be fickle and sensitive to configuration glitches. Here we look at a few cases from the Samba mailing list.
A user reported, I have the following PAM configuration:
auth required /lib/security/pam_securetty.so auth sufficient /lib/security/pam_winbind.so auth sufficient /lib/security/pam_unix.so use_first_pass nullok auth required /lib/security/pam_stack.so service=system-auth auth required /lib/security/pam_nologin.so account required /lib/security/pam_stack.so service=system-auth account required /lib/security/pam_winbind.so password required /lib/security/pam_stack.so service=system-auth
When I open a new console with [ctrl][alt][F1], I can't log in with my user “pitie.” I have tried with user “scienceu\pitie” also.
The problem may lie with the inclusion of
service=system-auth. That file often contains a lot of stuff that may
duplicate what you are already doing. Try commenting out the
account and see if things work. If they do, look at
/etc/pam.d/system-auth and copy only what you need from it into your
/etc/pam.d/login file. Alternatively, if you want all services to use
Winbind, you can put the Winbind-specific stuff in
wbinfo -uMIDEARTH\maryo MIDEARTH\jackb MIDEARTH\ameds ... MIDEARTH\root
wbinfo -gMIDEARTH\Domain Users MIDEARTH\Domain Admins MIDEARTH\Domain Guests ... MIDEARTH\Accounts
getent passwdroot:x:0:0:root:/root:/bin/bash bin:x:1:1:bin:/bin:/bin/bash ... maryo:x:15000:15003:Mary Orville:/home/MIDEARTH/maryo:/bin/false
“ But this command fails: ”
chown maryo a_filechown: 'maryo': invalid user
“This is driving me nuts! What can be wrong?”
Your system is likely running
nscd, the name service
caching daemon. Shut it down, do not restart it! You will find your problem resolved.