Table of Contents
Stackable VFS (Virtual File System) modules support was new to Samba-3 and has proven quite popular. Samba passes each request to access the UNIX file system through the loaded VFS modules. This chapter covers the modules that come with the Samba source and provides references to some external modules.
If not supplied with your platform distribution binary Samba package, you may have problems compiling these modules, as shared libraries are compiled and linked in different ways on different systems. They currently have been tested against GNU/Linux and IRIX.
To use the VFS modules, create a share similar to the one below. The important parameter is the vfs objects parameter where you can list one or more VFS modules by name. For example, to log all access to files and put deleted files in a recycle bin, see the smb.conf with VFS modules example:
Example 23.1. smb.conf with VFS modules
The modules are used in the order in which they are specified. Let's say that you want to both have a virus scanner module and a recycle bin module. It is wise to put the virus scanner module as the first one so that it is the first to get run and may detect a virus immediately, before any action is performed on that file. vfs objects = vscan-clamav recycle
Some modules can be used twice for the same share. This can be done using a configuration similar to the one shown in the smb.conf with multiple VFS modules.
Example 23.2. smb.conf with multiple VFS modules
This module allows the default quota values, in the windows explorer GUI, to be stored on a Samba-3 server. The challenge is that linux filesystems only store quotas for users and groups, but no default quotas.
Samba returns NO_LIMIT as the default quotas by default and refuses to update them. With this module you can store the default quotas that are reported to a windows client, in the quota record of a user. By default the root user is taken because quota limits for root are typically not enforced.
This module takes 2 parametric entries in the
smb.conf file. The default prefix for each is the
“default_quota”. This can be overwrittem when you load the module in the vfs
modules parameter like this:
vfs objects = default_quota:myprefix
The parametric entries that may be specified for the default_quotas module are:
This parameter takes a integer argument that specifies the uid of the quota record that will be used for storing the default user quotas.
The default value is 0 (for root user). An example of use is:
vfs objects = default_quota default_quota: uid = 65534
The above demonstrates the case where the
myprefix was omitted, thus the
default prefix is the name of the module. When a
myprefix parameter is
specified the above can be re-written like this:
vfs objects = default_quota:myprefix myprefix: uid = 65534
This parameter takes a boolean argument that specifies if the stored default quota values also be
reported for the user record, or if the value
NO_LIMIT should be reported to
the windows client for the user specified by the
The default value is
yes (which means to report NO_LIMIT). An example of use
is shown here:
vfs objects = default_quota:myprefix myprefix: uid nolimit = no
This parameter takes an integer argument, it's just like the
for group quotas. NOTE: group quotas are not supported from the windows explorer.
The default value is 0 (for root group). An example of use is shown here:
vfs objects = default_quota default_quota: gid = 65534
This parameter takes a boolean argument, just like the
but for group quotas. NOTE: group quotas are not supported from the windows explorer.
The default value is
yes (which means to report NO_LIMIT). An example of use
is shown here:
vfs objects = default_quota default_quota: uid nolimit = no
An example of use of multiple parametric specifications is shown here:
... vfs objects = default_quota:quotasettings quotasettings: uid nolimit = no quotasettings: gid = 65534 quotasettings: gid nolimit = no ...
This module is identical with the
audit module above except
that it sends audit logs to both syslog as well as the
smbd log files. The
log level for this module is set in the
Valid settings and the information that will be recorded are shown in the next table.
Table 23.1. Extended Auditing Log Information
|Log Level||Log Details - File and Directory Operations|
|0||Make Directory, Remove Directory, Unlink|
|1||Open Directory, Rename File, Change Permissions/ACLs|
|2||Open & Close File|
|10||Maximum Debug Level|
Syslog can be used to record all transaction. This can be disabled by setting
syslog = 0.
Logging can take place to the default log file (
for all loaded VFS modules just by setting in the
log level = 0 vfs:x, where x is the log level.
This will disable general logging while activating all logging of VFS
module activity at the log level specified.
Detailed logging can be obtained per user, per client machine, etc.
This requires the above together with the creative use of the
log file settings.
An example of detailed per-user and per-machine logging can be obtained by setting log file = /var/log/samba/%U.%m.log.
Auditing information often must be preserved for a long time. So that the log files do not get rotated
it is essential that the max log size = 0 be set
This module was created to allow Roaming Profile files and directories to be set (on the Samba server under UNIX) as read only. This module will, if installed on the Profiles share, report to the client that the Profile files and directories are writeable. This satisfies the client even though the files will never be overwritten as the client logs out or shuts down.
A Recycle Bin-like module. Where used, unlink calls will be intercepted and files moved to the recycle directory instead of being deleted. This gives the same effect as the Recycle Bin on Windows computers.
The Recycle Bin will not appear in
Windows Explorer views of the network
file system (share) nor on any mapped drive. Instead, a directory
.recycle will be automatically created
when the first file is deleted and
is not configured.
recycle:repository is configured, the name
of the created directory depends on
Users can recover files from the recycle bin. If the
recycle:keeptree has been specified, deleted
files will be found in a path identical with that from which the
file was deleted.
Supported options for the
recycle module are as follow:
Set it to the octal mode you want for the recycle directory. With
this mode the recycle directory will be created if it not
exists and the first file is deleted.
recycle:subdir_mode is not set, these
mode also apply to sub directories.
directory_mode not exists, the default
mode 0700 is used.
Set it to the octal mode you want for the sub directories of
the recycle directory. With this mode the sub directories will
recycle:subdir_mode is not set, the
sub directories will be created with the mode from
Advantages compared to the old netatalk module:
Does not care about creating .AppleDouble forks, just keeps them in sync.
If a share in
smb.conf does not contain .AppleDouble item in hide or veto list, it will be added automatically.
With Samba or Windows servers, shadow_copy is designed to be an end-user tool only. It does not replace or enhance your backup and archival solutions and should in no way be considered as such. Additionally, if you need version control, implement a version control system. You have been warned.
The shadow_copy module allows you to setup functionality that is similar to MS shadow copy services. When setup properly, this module allows Microsoft shadow copy clients to browse "shadow copies" on Samba shares. You will need to install the shadow copy client. You can get the MS shadow copy client here.. Note the additional requirements for pre-Windows XP clients. I did not test this functionality with any pre-Windows XP clients. You should be able to get more information about MS Shadow Copy from the Microsoft's site.
The shadow_copy VFS module requires some underlying file system setup with some sort of Logical Volume Manager (LVM) such as LVM1, LVM2, or EVMS. Setting up LVM is beyond the scope of this document; however, we will outline the steps we took to test this functionality for example purposes only. You need to make sure the LVM implementation you choose to deploy is ready for production. Make sure you do plenty of tests.
Here are some common resources for LVM and EVMS:
At the time of this writing, not much testing has been done. I tested the shadow copy VFS module with a specific scenario which was not deployed in a production environment, but more as a proof of concept. The scenario involved a Samba-3 file server on Debian Sarge with an XFS file system and LVM1. I do NOT recommend you use this as a solution without doing your own due diligence with regard to all the components presented here. That said, following is an basic outline of how I got things going.
Installed Operating System . In my tests, I used Debian Sarge (i.e., testing) on an XFS file system. Setting up the OS is a bit beyond the scope of this document. It is assumed that you have a working OS capable of running Samba.
Install & Configure Samba. See the installation section of this HOWTO for more detail on this. It doesn't matter if it is a Domain Controller or Member File Server, but it is assumed that you have a working Samba 3.0.3 or later server running.
Install & Configure LVM. Before you can make shadow copies available to the client, you have to create the shadow copies. This is done by taking some sort of file system snapshot. Snapshots are a typical feature of Logical Volume Managers such as LVM, so we first need to have that setup.
The following is provided as an example and will be most helpful for Debian users. Again, this was tested using the "testing" or "Sarge" distribution.
Install lvm10 and devfsd packages if you have not done so already. On Debian systems, you are warned of the
interaction of devfs and lvm1 which requires the use of devfs filenames. Running
&& apt-get install lvm10 devfsd xfsprogs should do the trick for this example.
Now you need to create a volume. You will need to create a partition (or partitions) to add to your volume. Use your favorite partitioning tool (e.g., Linux fdisk, cfdisk, etc.). The partition type should be set to 0x8e for "Linux LVM." In this example, we will use /dev/hdb1.
Once you have the Linux LVM partition (type 0x8e), you can run a series of commands to create the LVM volume.
You can use several disks and/or partitions, but we will use only one in this example. You may also need to
load the kernel module with something like
modprobe lvm-mod and set your system up to load
it on reboot by adding it to (
You can format the logical volume with any file system you choose, but make sure to use one that allows you to take advantage of the additional features of LVM such as freezing, resizing, and growing your file systems.
root#mkdir -p /data/shadow_share
or whatever you want to name your shadow copy-enabled Samba share. Make sure you set the permissions so that
you can use it. If in doubt, use
chmod 777 /data/shadow_share and tighten the permissions
once you get things working.
Install & Configure the shadow_copy VFS Module. Finally we get to the actual shadow_copy VFS module. The shadow_copy VFS module should be available in Samba 3.0.3 and higher. The smb.conf configuration is pretty standard. Here is our example of a share configured with the shadow_copy VFS module:
Example 23.3. Share With shadow_copy VFS
Create Snapshots and Make Them Available to shadow_copy.so. Before you can browse the shadow copies, you must create them and mount them. This will most likely be done with a script that runs as a cron job. With this particular solution, the shadow_copy VFS module is used to browse LVM snapshots. Those snapshots are not created by the module. They are not made available by the module either. This module allows the shadow copy-enabled client to browse the snapshots you take and make available.
Here is a simple script used to create and mount the snapshots:
#!/bin/bash # This is a test, this is only a test SNAPNAME=`date +%Y.%m.%d-%H.%M.%S` xfs_freeze -f /data/shadow_share/ lvcreate -L10M -s -n $SNAPNAME /dev/shadowvol/sh_test xfs_freeze -u /data/shadow_share/ mkdir /data/shadow_share/@GMT-$SNAPNAME mount /dev/shadowvol/$SNAPNAME \ /data/shadow_share/@GMT-$SNAPNAME -onouuid,ro
Note that the script does not handle other things like remounting snapshots on reboot.
Test From Client. To test, you will need to install the shadow copy client which you can obtain from the Microsoft web site. I only tested this with an XP client so your results may vary with other pre-XP clients. Once installed, with your XP client you can right-click on specific files or in the empty space of the shadow_share and view the "properties." If anything has changed, then you will see it on the "Previous Versions" tab of the properties window.
This section contains a listing of various other VFS modules that have been posted but do not currently reside in the Samba CVS tree for one reason or another (e.g., it is easy for the maintainer to have his or her own CVS tree).
No statements about the stability or functionality of any module should be implied due to its presence here.
I have created a VFS module that implements a fairly complete read-only filesystem. It presents information from a database as a filesystem in a modular and generic way to allow different databases to be used. (Originally designed for organizing MP3s under directories such as “Artists,” “Song Keywords,” and so on. I have since easily applied it to a student roster database.) The directory structure is stored in the database itself and the module makes no assumptions about the database structure beyond the table it requires to run.
Any feedback would be appreciated: comments, suggestions, patches, and so on. If nothing else, it might prove useful for someone else who wishes to create a virtual filesystem.
samba-vscan is a proof-of-concept module for Samba, which provides on-access anti-virus support for files shared using Samba. samba-vscan supports various virus scanners and is maintained by Rainer Link.
Samba users have been using the RPMS from SerNet without a problem. OpenSUSE Linux users have also used the vscan scanner for quite some time with excellent results. It does impact overall write performance though.
The following share stanza is a good guide for those wanting to configure vscan-clamav:
[share] vfs objects = vscan-clamav vscan-clamav: config-file = /etc/samba/vscan-clamav.conf
The following example of the
vscan-clamav.conf file may help to get this
<title>VFS: Vscan ClamAV Control File</title> # # /etc/samba/vscan-clamav.conf # [samba-vscan] ; run-time configuration for vscan-samba using ; clamd ; all options are set to default values ; do not scan files larger than X bytes. If set to 0 (default), ; this feature is disable (i.e. all files are scanned) max file size = 10485760 ; log all file access (yes/no). If set to yes, every access will ; be logged. If set to no (default), only access to infected files ; will be logged verbose file logging = no ; if set to yes (default), a file will be scanned while opening scan on open = yes ; if set to yes, a file will be scanned while closing (default is yes) scan on close = yes ; if communication to clamd fails, should access to file denied? ; (default: yes) deny access on error = no ; if daemon failes with a minor error (corruption, etc.), ; should access to file denied? ; (default: yes) deny access on minor error = no ; send a warning message via Windows Messenger service ; when virus is found? ; (default: yes) send warning message = yes ; what to do with an infected file ; quarantine: try to move to quantine directory ; delete: delete infected file ; nothing: do nothing (default) infected file action = quarantine ; where to put infected files - you really want to change this! quarantine directory = /opt/clamav/quarantine ; prefix for files in quarantine quarantine prefix = vir- ; as Windows tries to open a file multiple time in a (very) short time ; of period, samba-vscan use a last recently used file mechanism to avoid ; multiple scans of a file. This setting specified the maximum number of ; elements of the last recently used file list. (default: 100) max lru files entries = 100 ; an entry is invalidad after lru file entry lifetime (in seconds). ; (Default: 5) lru file entry lifetime = 5 ; exclude files from being scanned based on the MIME-type! Semi-colon ; seperated list (default: empty list). Use this with care! exclude file types = ; socket name of clamd (default: /var/run/clamd). Setting will be ignored if ; libclamav is used clamd socket name = /tmp/clamd ; limits, if vscan-clamav was build for using the clamav library (libclamav) ; instead of clamd ; maximum number of files in archive (default: 1000) libclamav max files in archive = 1000 ; maximum archived file size, in bytes (default: 10 MB) libclamav max archived file size = 5242880 ; maximum recursion level (default: 5) libclamav max recursion level = 5
Obviously, a running clam daemon is necessary for this to work. This is a working example for me using ClamAV.
The ClamAV documentation should provide additional configuration examples. On your system these may be located
/usr/share/doc/ directory. Some examples may also target other virus scanners,
any of which can be used.